Sonntag, 7. März 2010

Enginebay


The accessories are on the engine. Alternator, power steering pump and aircon compressor. Just to show you that an engine compartment can look good without any chrome bling. The alternator will have to be spaced out a little yet, to line up when the fan belt is mounted. Also will have to figure out how to get the fan hooked up to the viscous fan drive.

Donnerstag, 4. März 2010

Power to the steering

Same, same but different. Not the A/C, this time it's the power steering pump that needed cleaning and paint.
The good thing about parts being filthy and grimy is that they definately do not rust.

After the overhaul, ready to be installed...


Airconditioning

Did some work on the accessories. Since I'm going to use the 'Cuda in summertime when it's hot, I want working Airconditioning. After all, it's an original AC car ! The compressor seems to be in good working order, so all it needed was a thorough cleanup and some new paint.



Brackets and mounting bar were removed and painted seperately.

Montag, 22. Februar 2010

Windows 4.0

Installed the door windows on both sides. Now all four side windows are in place. I had help from my fourteen year old daughter Miriam who preferred working on the Cuda over our initial plan of going ice skating on sunday afternoon...now how good does that sound!



Passenger side window. The final adjustments will have to be made when the roof rail trim and seal are in place but the windows already fit really tight and roll up and down well.
The door gap also lined up well after the weight of the glass and the lock was added.

Sonntag, 21. Februar 2010

Door details

I started working on the doors. The new seals were easy to install and they fit really well. I've heard many bad things about aftermarket seals (enough not to throw away the old ones) but these pieces are realy great. All the little pegs line up with the holes in the doors perfectly. The lock mechanism is also installed.

The inside door handle bolts on to the hinge with the big spring, the small rod to the left ist for the door lock.
The next step is to install the side glass.


Donnerstag, 18. Februar 2010

Door installation

Ernst the expert helping me with the doors. Those things are really heavy and it's sheer impossible to bolt them on by yourself....I know, somebody out there has probably done it but I certainly couldn't.
Working togerter it is a fairly easy job, passenger side door is installed , for the time being, without any of the internals.

We installed the door just a fraction too high, figuring it will sag a little after the heavy glass, the lock and everything else is in place.


And yes, they open really fine! Now all that's missig is a hood and some front fenders and it will finally look the part of a 'Cuda again.



door hinges

Started working on putting the doors back on the 'Cuda. I can't recall when I took them off, seems like a lifetime ago. First step was to clean out the threads because some paint and filler had gotten into them at the paint shop. I had to hunt down the special tool, metric ones are available everywhere but an 3/8 unc bit....
Fastend the hinges on the doors loosly.

Finished driver side door with both hinges installed. The door is painted on the inside, not yet on the outside.
Of course all the screws were cleaned and zink plated.