More shifter linkage

Took care of the second part of the floor shifter linkage today. Cleaning, sanding and a quick dose of fresh paint does the trick on these parts.

The hardest part was getting the white plastic piece out ot the metal brace before painting luckily it didn't break.

All back together and ready to install.

Shifter

I reworked the shifter linkage today. No big problem, as it worked fine and all the parts are here. Some surface rust on two or three pieces, and those parts of the linkage that are under the car neede cleaning.

The plastic gromet came off the steel plate with a little coaxing, after that the plate could be sanded and painted flat black with the rattle can.

I was careful not to mix up the washers so everything would fit back together as it should.

Lots of old grease on this part, I just cleaned it, no use paintig it as I suppose it never was painted - and above that, it's a piece that won't be seen on the car unless you're lying under it.

All back together and waiting to be bolted back to the chassis.